제품소개 > 시편전처리장비 & Hot Stage

Linkam LTS350/420	Linkam THM600	TS1000/1200/1500
METCON SERVOCUT301	METCON GRINDING & POLISHING	TMETCON MOUNTING ECOPRESS100&200

Linkam Scientific Instruments
LTS 350 and 420 (Heating and Freezing Stage)

Feature

sample에 가해지는 온도변화에 따른 상태를 현미경으로
관찰하고자 할때 사용
사용자가 쉽게 분당 30ºC or 50ºC씩 온도 조절 가능
(-196ºC to 350 or 420ºC)
53.5mm x 43mm 넓은 샘플에 온도변화가 가능하며 X축Y축으로
15mm씩 움직임 가능
현미경에 기본적으로 장착 가능

Features and Benefits

Swing - out lid for easy sample exchange
Lager samples - Microscope slides
For Reflected and Transmitted light studies
15mm Sample translation in X and Y
Can be supplied with a range of different Windows for Raman FTIR UV and X-ray work

LTS 420 with Lid open showing the large area
heating block and holder for a standard
(76mm x 26mm) Microscope Slide

Heating stage with stage clamps being
attached to circular dovetail substage

System Options

LTS350 or 420

The difference between LTS350 and 420 is the rate of heating :
30C/min compared to 50C/min and maximun temperature of 350C
compared to 420C. The LTS420 uses a pure silver heating
element compared to the nickel plated copper element of the
LTS350 This means it has a faster response time to change in
temperature.

T95-LinkPad or T95-Linksys

The T95 LinkPad has an Lcd touchscreen data input display and can be used as a standalone system
controller. The T95-LinkSys is a PC computer interface controller and requires Linksys 32 control software
(supplied) to input a temperature profile. It cannot be used standalone.

Cooling

For fast controlled cooling between +100ºC to a minimun - 196ºC choose the LNP95 liquid nitrogen
cooling system. The LNP95 cooling pump communi-cates with the T95 system controller and varies the
pump speeds to give a precise flow of liquid nitrogen from the 2L Dewar (supplied), to enable cooling
speeds from 0.01 to 30°C/min.
(All fittings and Dewar are supplied with the pump).

Specifications

Temperature Range -196°C to 350 or 420°C
Sample area of 53.5x43mm
32 Ramp temperture profile programming
15mm XY manipulation as standard
Sample holder for standard 76x26mm microscope slides
Gas tight chamber for atmospheric control
Swing out lid for easy sample loading
Can be used with transmitted or reflected light
Mounts directly to microscope table or substage
Stage body size: 160x80x24mm
100 Ohm platinum sensor
Temperature stability <0.1°C
Inner lid to increase temperature stability
Direct injection of coolant into block
Highly conductive metal for improved heat transfer
Minimum Heating Rate 0.01°C/min
Maximum heating rate of 50°C/min (dependent on LTS stage type)
Response time of <1 second at 5°C/min at 50°C
Objective lens minimum working distance: 6mm
Condenser lens minimum working distance: 13.2mm